• Air and Fluid heating solutions
• Renewable energy
• Industry
• Ventilation
• Professionnal kitchen
• Agriculture and Farming

Applications: Protection against the overheating of the heaters due to an abnormal rise of the liquid temperaturedue to a flow failure. The mounting of the bulbs can be made inside standard dia. 8.5mm pockets, or in an additionalthermowell added on request.
Through wall fittings on capillary are also available. The thermostat body can be installed in a protective cover of theheating elements outputs, or remotely in a separate control cabinet. They are resettable after tripping, but prior fullaudit of the circuit is essential to find the cause of overheating and correct it before restarting.

Housing dimensions: 24.7 × 33 × 26mm (without terminals and reset)

Bulb and capillary: Stainless steel, capillary length 250mm or 1500mm, 150mm long PVC sleeve on capillary. Capillary minimum bending radius 5mm

Temperature sensing element: Liquid filled bulb and capillary

Terminals: 6.35 × 0.8 quick connect terminals (M4 screws also available on request). Terminals can be vertical,horizontal or bended at 45°

Adjustment: Fixed setting, sealed.sealed or adjustable by mini dial

Manual reset: Fail safe, fixed setting, front access reset button.

Fail safe contact action by low temperature: Temperatures under -10°C (14°F) will trigger the manual reset

Mounting: Front bushing with M10 × 0.75 thread

Rating: 20(4)A 250V/16 (4)A 400VAC

Contacts: SPNC snap action contact

Max ambient temperature on body: 150°C (302°F)