中文
English
Home
Applications
Products
Certification
About Us
Contact
Home
  >  
Controls and Safety : Automatic Thermostat
  >  
Type Y8WH-X and Y8WH-Y
Type Y8WH-X and Y8WH-Y
Electronic temperature controller with digital display, NTC sensor, for heat trace pipe temperature control, remote wall mounting
Controls and Safety
Automatic Thermostat
Check PDF
Click to see more languages available in the datasheet
Product applicable fields
    The product does not currently have its own area
product presentation

Applications
These waterproof control boxes with wall mounting allow remote control of the surface temperature of the pipes. The connection to the heating elements is via a connection box with or without offset mounting foot type Y26, Y27, Y28, Y29, or with a 3-conductor power cable and a separate NTC temperature sensor cable, or by an offset mounting foot connection box type Y29B and a single 5-conductor cable equipped with a 5-way connector. The use this model with digital display is simple and intuitive, and does not need specially trained users.

The use of a wired temperature measurement sensor, which can be disconnected, allows to overcome the problems of wall crossing of bulb thermostats, the capillary of which cannot be cut, and to proceed with installation of connection and control boxes after mounting the heating cables and the temperature sensor, installation of the pipe insulation and installation of the insulation protection sheath.

                                                                                                   Main features
Enclosure: IP69K, reinforced PA66, with polycarbonate window access. Sealable cover and window.

Wall mounting: Four removable and rotatable legs.

Electrical connection:
- On internal terminal block for power supply on all models.

- On the model with 3 cable glands: On internal terminal block for the output and the temperature sensor.

- On the model with output by 5-way connector, the internal wiring of the power output and the temperature sensor to the connector is carried out.

Cable glands:
- Three cable glands model: Two M24 cable glands for power supply and power output and one M12 cable gland for the temperature sensor.

- 5-way connector model: A 5-way female connector mounted on the wall of the housing and a 5-way male connector to be mounted on cable, and an M24 cable gland for the power supply cable.

Switching devices: Main illuminated switch and safety fuse Controller: With very simple end-user interface. Change of set point is made without password, with up and down keys.

Action: On-Off with adjustable differential.

Display: Can be selected in °C or °F
Sensor input: NTC, R@25°C: 10 Kohms (±1%), B@25/50°C: 3380 (±1%).

Power output: 16A 230V res. relay.

Display: 3 digits
Power supply: AC 220-230V 50-60Hz.

Accuracy: ±1°C (±2°F) or 0.3% end of scale ± one digit.

Self-testing: Over-scale, under-scale, and open sensor circuit.

Ambient temperature: -10 to 60°C, 20 to 85% relative humidity, non-condensing.

Options:
- Pt100 or K thermocouple sensor.

- Pipe mounting bracket. Screwed on the back of the case, it allows mounting on a horizontal or vertical tube, at a distance of about 50mm. (See accessories 6YTQT).