The product does not currently have its own area

Main user:These models have been designed to control the temperature inside electrical cabinets, being mounted on their DIN rail. Their SPDT contact allows their use to control a cabinet heater, a fan, or a cooling system. The anticipation function allows to select 2 different values for the differential.

Temperature ranges: -10+50°C (15-120°F); -5+30°C (23-86°F); 0+60°C (30-140°F); +20+80°C (70-180°F)

Set point adjustment: °C or °F printed knob

Sensing element: bimetal

Contact type: snap-action contact, open or close on temperature rise, 10(2)A 125/250V alt.

Electrical life: >10,000 cycles at rated values

Contact resistance: <10mOhm

Electrical connection: 4 screw terminals, for 1.5mm² wires. Neutral terminal must be used only when thermal anticipation is needed (reduced differential)

Attention: in standard, thermal anticipator (TA) is wired for use in 230V

Mounting: by clip for 35mm DIN rail,

EN50022 Casing: UL94 V0, PC-ABS, RAL 1010 light grey

Dimensions: 70 × 50 × 33mm

Operating temperature range: -20 to +80°C (-4+176°F)

Ingress protection: IP30