• Air and Fluid heating solutions
• Renewable energy
• Industry
• Ventilation
• Professionnal kitchen
• Agriculture and Farming
• Petrochemistry

Applications：Developed for industrial applications in electric blankets, heating belts, jacket heaters, this thermostat is equipped with a flat sensitive part allowing to put it in contact with a surface, 4 holes allowing to mount it on this surface, and a direct passage between the connection terminal block and the back of the housing, for the passage of wires to the heating element.

Housing: IP65, 120 × 50 × 69 mm, fiberglass reinforced PA66, UL94V0. High impact and UV resistance, with silicone waterproof gasket on thermostat shaft.

Electrical input: ISO M20 cable gland, Black PA66, IP67, for cables from 6 to 12 mm dia.

Electrical output: 2 dia.4 mm holes, located on the backside face, allow to introduce the heating element wires directly inside the housing. If IP65 ingress protection is requested on the backside, these 2 holes must be sealed around the wires with RTV silicone.

Temperature adjustment: By temperature printed knob.

Sensing element: Liquid filled bulb, located inside the brass cap.

Adjustment ranges: 30-90°C (85-195°F), 30-110°C (85-230°F).

Pilot lights: Allow to visualize the power supply and thermostat contact position.

Electrical connections: Inside, on 2.5mm² screw terminals connection block.

Mounting: By 4 holes for screws dia. 4mm, 40 × 110 mm distance.

Electrical rating: Open on temperature rise contact (C-1), 16A (2.6) 250VAC, >100.000 cycles.

Minimum Storage temperature: -35°C (-30°F)

Maximum ambient temperature: 110°C (230°F)