Components and Accessories : Other

Connector for thermostat terminals

None

Find out more information

Type 6YTQTW46 and 6YTQTV4

Explosion proof enclosures accessories Stainless steel mounting feet for explosion proof enclosures, screwed on their bottom. Mounting on pipes by nylon ties or metal clamps.

Find out more information

Type 6YTQTV47

Explosion proof enclosures accessories Stainless steel mounting foot for explosion proof heat tracing cable termination. Mounting on pipes by nylon ties or metal clamps.

Find out more information

Type 6YTNM

Silicone sleeves for connection of heating cable on power supply wires (field or workshop assembly). Filling with room temperature vulcanizing silicone resin (RTV)

Find out more information

Type BX

ATEX connection blocks, 4mm² and 6mm² for ground, for EX “e” enclosures

Find out more information

Type 6658

Mounting devices and cable clamping devices

Find out more information

Type BG

Elevated PA66 connection blocks, T200°C

Find out more information

Type BH

C610 Alumina ceramic insulators for sheathed heaters

Find out more information

Type BF

Flat PA66 connection blocks, T200°C

Find out more information

Type Y036G

Thermostats for air heating control, convection heating applications

Find out more information

Type Y23

Thermostats for air heating control, infrared heating applications

Find out more information

Type 6YTPG

Cable glands

Find out more information

Type 6YTR, 6YTT

Cable glands

Find out more information

Type 76TU, 66RRA

Nuts and tube securing nuts 1/4” NPSM and 9/16-18 UNC, 6 × 3mm and 3 × 1.5mm PVC tubes. ⅛ to dia. 4mm spout conversion fittings

Find out more information

Type Y3K2

Round, large diameter, simplified immersion heater enclosure - Mounting with an internal bracket on single thread brass or stainless steel fittings, 2½" and M45x2 - Output by M25 cable gland

Find out more information

Type Y3L1

Miniature enclosure for temperature sensor or level sensor - Flat lid - Bottom side without hole or with hole for fitting - Hole for M20 cable gland

Find out more information

Type Y3L2

Miniature enclosure for temperature sensor or level sensor - Flat lid - Bottom side with stamped hexagon 35 mm on flat, for TIG welded ½" or ¾" fittings - Hole for M20 cable gland

Find out more information

Type Y3L3

Miniature enclosure for immersion heater, temperature sensor or level sensor - Flat lid - Bottom side without hole, or with hole for orientable fitting with ring or inside nut - Hole for M20 cable gland

Find out more information

Type Y3L4

Enclosure for small storage heater immersion heater - Flat lid - Bottom side with stamped 61 mm hexagon, can be used on orientable fitting with ring or inside nut - Hole for M20 cable gland - Can receive a standard storage heater immersion heater, with 1¼" brass fitting, with 54 mm on flat hexagon

Find out more information

Type Y3S3

Immersion heater or temperature sensor enclosure - High lid - Bottom side without hole, or with hole for orientable fitting with ring or internal nut - Hole for M20 cable gland

Find out more information

Type Y3S4

Immersion heater enclosure with built-in hexagon for fitting - High lid - Bottom side with stamped 61 mm hexagon, can be used on orientable fitting with ring or inside nut - Can be used with 1¼" or 1½" or M45 TIG welded fittings - Hole for M20 cable gland - Can receive a standard storage heater immersion heater, with 1¼" brass fitting, with 54 mm on flat hexagon

Find out more information

Type Y3S5

Medium size enclosure for immersion heater or temperature sensor - Bottom side without hole, or with hole for orientable fitting with ring or internal nut up to 2½" - Fits the 2" plastic nut for swimming pools, spas and aquarium heaters and electronic thermostat control - Hole for M25 cable gland

Find out more information

Type Y3S6

Medium size immersion heater enclosure with built-in hexagon for fitting - Bottom side with stamped hexagon 58 mm on flat, for 1¼" or 1½" or M45 TIG welded fittings - Hole for M25 cable gland

Find out more information

Type Y3SA

Immersion heater or temperature sensor, flat cover - Bottom side without hole, or with hole for orientable fitting with ring or internal nut, up to M77 or 2½" - Fits the 2" plastic nut for swimming pools, spas and aquarium heaters and electronic thermostat control and electronic manual reset thermostat - Hole for one M25 cable gland, or holes for one M25 and two M16 - Optional hole for pilot light

Find out more information

Type Y3SB

Big immersion heater enclosure, with flat cover and stamped hexagon - Bottom side with stamped 58 mm on flat hexagon, for 1¼", 1½" or M45 TIG welded fittings - Hole for one M25 cable gland, or holes for one M25 and two M16 - Optional hole for pilot light

Find out more information

Type Y3SC

Big immersion heater enclosure, with flat cover and stamped hexagon, for big immersion heaters - Bottom side with stamped 85 mm on flat hexagon, for 2½" or M77 TIG welded fittings - Hole for one M25 cable gland, or holes for one M25 and two M16 - Optional hole for pilot light

Find out more information

Type Y3TB

Big enclosure, for immersion heaters or instruments, with flat cover, for welding on tubes - Bottom side with stamped hole with welding lips for direct welding on in line heaters body or on dia. 80 mm tubes. - Hole for one M25 cable gland, or holes for one M25 and two M16 - Optional hole for pilot light

Find out more information

Type Y3TC

Big enclosure, for immersion heaters or instruments, with flat cover for welding on tubes - Bottom side with stamped hole with welding lips for direct welding on in line heaters body or on dia. 100 mm tubes. - Hole for one M25 cable gland, or holes for one M25 and two M16 - Optional hole for pilot light

Find out more information

Type Y3S7

Big size enclosure for immersion heater or temperature sensor - Bottom side without hole, or with hole for orientable fitting with ring or internal nut, up to M77 or 2½" - Fits the 2" plastic nut for swimming pools, spas and aquarium heaters and electronic thermostat control and electronic manual reset thermostat - Hole for one M25 cable gland, or holes for one M25 and two M16 - Optional hole for pilot light - Can receive one or two power relays

Find out more information

Type Y3S8

Big size enclosure for immersion heater with built-in hexagon - Bottom side with stamped 58 mm on flat hexagon, for 1¼", 1½" or M45 TIG welded fittings - Hole for one M25 cable gland, or holes for one M25 and two M16 - Optional hole for pilot light - Can receive one or two power relays

Find out more information

Type Y3S9

Big size enclosure with built in hexagon for large size immersion heaters - Bottom side with stamped 85 mm on flat hexagon, for 2½" or M77 TIG welded fittings - Hole for one M25 cable gland, or holes for one M25 and two M16 - Optional hole for pilot light - Can receive one or two power relays

Find out more information

Type Y3T8

Big size immersion heater or controls enclosure, for direct welding on pipes - Bottom side with stamped hole with welding lips for direct welding on in line heaters body or on dia. 80 or 100 mm tubes. - Hole for one M25 cable gland, or holes for one M25 and two M16 - Optional hole for pilot light - Can receive one or two power relays

Find out more information

Type Y3TA

Big size immersion heater or controls enclosure, for direct welding on pipes - Bottom side with stamped hole with welding lips for direct welding on in line heaters body or on dia. 100 mm tubes. - Hole for one M25 cable gland, or holes for one M25 and two M16 - Optional hole for pilot light - Can receive one or two power relays

Find out more information

Type Y3A1

Sub-miniature enclosure for temperature sensor, level sensor, electronic printed circuit or cartridge heater - Can receive a drill up to 21 mm (½") for sensor rod outlet - Includes mounting bosses for PCBs - Includes a removable 3-way 2.5 mm² terminal block in the version with M16 cable gland output - Output via M12 connector, Cnomo connector or M16 cable gland

Find out more information

Type Y3A2

Sub-miniature enclosure for temperature sensor, level sensor, electronic printed circuit or cartridge heater - Includes a moulded pilot light lens - Can receive a drill up to 21 mm (½") for sensor rod outlet - Includes mounting bosses for PCBs - Includes a removable 3-way 2.5 mm² terminal block in the version with M16 cable gland output - Output via M12 connector, Cnomo connector or M16 cable gland

Find out more information

型号 Y3A3

Miniature enclosure for temperature sensor, level sensor, electronic printed circuit or cartridge heater - Includes two removable brackets for wall mounting - Can receive a drill up to 21 mm (½") for sensor rod outlet - Includes mounting bosses for PCBs - Includes a removable 5-way 2.5 mm² terminal block - Output via M20 cable gland

Find out more information

Type Y3A4

Miniature enclosure for temperature sensor, level sensor, electronic printed circuit or cartridge heater - Includes two removable brackets for wall mounting - Can receive a drill up to 21 mm (½") for sensor rod outlet - Includes mounting bosses for PCBs - Can eventually receive a removable 5-way 2.5 mm² terminal block - Output via an IP66 M21 connector, 2 to 5 ways

Find out more information

Type Y301

Miniature enclosure for temperature sensor, level sensor, electronic printed circuit or cartridge heater - Can accommodate ½" threaded fittings with internal lock nut or ¾" or 1" brass fittings with 2 x M4 screws (Use a flat gasket) - Includes a removable internal 3-way 2.5 mm² terminal block - PG11 cable gland outlet

Find out more information

Type Y302

Simplified immersion heater enclosure for fittings with M4 central screw - Mounting on brass fittings 1¼", 1½" and M45x2 - Output by M20 cable gland

Find out more information

Type Y3C1

Immersion heater enclosure for standard fittings with three M4 mounting screws at 120° - For 1¼", 1½" and M45x2 fittings - Features a removable, elevated, 6-way 2.5 mm² terminal block - Output by M20 cable gland

Find out more information