Main applications
These heavy duty fan heaters, are designed for professional, commercial or industrial applications.
They are equipped with 3 silent high flow fans, and a waterproof control box equipped with a 2 poles, illuminated on-off switch, an adjustable control thermostat, a safety thermostat, and a tip over switch.
Although their heating elements and control boxes are waterproof, their fans are not, and they should not be used outdoors without proper protection of the hot air outlets against liquid drops and rain.
For outdoor applications, use the models without fans.
Their insulation class 1 does not allow using them in bathroom and in all places requiring Class II insulation. They are not designed for use in hazardous environments.
They exist with painted steel or stainless steel frame.
The main applications are heating of professional workshops, bungalows, crane cabins, construction equipment, wagons or locomotive cockpits, technical rooms, ovens, containers, dryers.
Main features
Dimensions: 450 × 130 × 150mm body (control box and legs not included)
Ingress protection: IP40 (fan heater models), or IP65 (models without fans)
Heaters: 3 finned elements in 304L stainless steel. Fins 25 × 50mm 304 stainless steel. Surface load 3W/cm² for fan models and 2W/cm² for no fan models.
Frame material: 0.8mm thick sheet, high strength (Withstands +100kg distributed load), two versions: - Galvanized steel sheet with black epoxy paint
- 304 stainless steel sheet.
Fans (only for models with fans): 3 fans of 120 × 120mm, flow 3 × 30m3/h. L10 life expectancy: 50,000 h (>5 years) at 25°C. L10 refers to the time at which statistically, 90% of the fan will still be operative. Life expectancy is reduced by about 50% when ambient temperature rises to 50-70°C.
Controls:
Located inside a PA66, IP65, IK10 protection box, with sealable window, providing access to:
- Adjustable bulb and capillary control thermostat, range 4 to 40°C,
- Fail safe high limit manual reset thermostat for protection against air outlet obstruction or fans failure- Tip-over switch to protect against heater fail over
Electrical connection: By grounded euro plug, 2 meters, 3 × 1.5mm² (no cable supplied in the 3 phases version)
Mounting: 2 removable legs can be mounted under the frame (floor mounting) or on the side (wall mounting).
Voltage: Single phase 230V, 50/60Hz or 400V three phases with neutral Power:
- IP40 single phase, 230V: 2000W, 3500W; 3 phases: 4000W
- IP65 single phase, 230V: 1300W, 2600W; 3 phases: 2600W
Ambient temperature: -20 to +60°C
Net weight: 8.1 kg
Option:
- Infrared on-off remote control
- Customization accepted