The product does not currently have its own area

Applications
This box is used to connect a power supply cable to a self-regulating cable, or two self-regulating cables end to end.
It can be mounted flat on a surface, or on a pipe, including with insulation up to 50mm thick.
Access to connectors is very easy, and the connection is very simple, in particular for flat self-regulating cables with metallic protective braid.
They can be used in domestic and industrial environments as well as in explosive atmospheres.

Approvals:
- Industrial applications in electrical heat tracing according to IEC 62395.
- Applications in explosive environments: These boxes are approved as Increased safety "e": (Device preventing the production of sparks at the connections by ensuring the necessary mechanical support and insulation).

Protection against gaz:
II 2G Ex cb IIC T5 Gb

Protection against dust:
II 2D Ex tb IIIC T95°C Db

Certificates:
ATEX: TÜV 22 ATEX 8896 X
IECEx: IECEx TUR 22.0061 X
CCCEx: ??

Main features

Material: Black PPS, 100mm × 65mm × 46mm (Cable glands not included). Superior UV resistance.

Waterproof grade: IP67 and IP69K (high pressure hot water washing)

Shocks resistance: The highest, IK10 (Cable gland not included).

Mounting:
- Wall mounting: 2 wall mounting lugs allow the mounting on a flat surface. Holes distance 112 × 45mm.
- Pipe mounting with 10mm offset: Two removable stainless steel legs are supplied as standard and allow mounting on a tube using a nylon tie or metal clamp. The distance from the tube limits the heating of the box.
- Pipe mounting with 50mm offset: Two removable stainless steel legs allow the installation of a thermal insulation and its protection before snapping-on the box on it and making electric connections (Available as an accessory, see catalogue page on 6YTQW parts).

Terminals:
- The terminals are piercing the insulation layers with a multiple chisels (patented).
- These terminals are designed to receive self-regulating heating cables with any distance between the bus wires between 2mm and 10mm.
- These terminals can also possibly be used for conventional conductors of power supply cables.
- All terminals are protected against loosening by vibration or thermal shock.
- The mechanical tightening of the cable is ensured by a screwed metal saddle, usable on round or flat cable.
This patented saddle also ensures the earthing of the metal braid of the heating cables.

- Wire gauge: 3 × 1mm² to 3 × 6mm².

- Maximum permissible intensity: 32A 250V.

Cables outlet: With M25 cable glands, with 70 shore NBR gaskets (Silicone is available on request).

- Maximum diameter of round cables: 8; 12, 14, 16.3mm depending on the gaskets installed. A special tightening saddle is supplied for cables from 14 to 16.3mm diameter
- Limit sizes of oblong cables:
- from 8 × 5 to 9.5 × 6mm
- from 9.5 × 2.5 to 11 × 3.5mm
- from 11 × 4 to 13 × 6mm
- from 12.5 × 8 to 14.2 × 9.2mm

Inviolability: The case can receive one or two seals (Supplied with 5 red nylon ties for use in the sealing holes).

Lid:

Ambient temperature limits: -40 to + 50°C. (-40°F; +122°F)

Maximum linear power of heating cable: 75W / m.

Maximum intensity: 32A per terminal.

Easy assembly: Assembly is made with full access to terminals when cover is removed. Mounting on wall or pipe can be made with cover removed or cover assembled closed without being hindered by the tightening link

Accessory: Bracket in stainless steel for offset mounting on pipe with up to 50mm insulation thickness. Designed to be added on the connection box with screws. See the accessories pages for models 6YTQT.

Options:
Consult us for parts numbers of simplified models with only one dimension of cable gland gasket for round wire and flat wires, customized label, and specific set of accessories for pipe mounting (OEM versions).