中文
English
Home
Applications
Products
Certification
About Us
Contact
Renewable energy
APPLICATION AREAS
Renewable energy

The share of renewable energy in Europe's energy consumption is booming, driven by European environmental policies.

Our efforts and investments over the past few years have allowed us to offer high-reliability products, allowing us to be referenced as a tier-one supplier by major heat pump manufacturers.

We are continuing our developments to complete our ranges.

These ranges include:

These products are designed with durability in mind. They are resistant to water hammer and the risk of leaks caused by micro-defects in the welds thanks to a TIG welding process. They are available in 304L stainless steel (316L optional), heating element body in 316L (Incoloy 800 optional).

 

These products can be customised to meet your needs and application.

We can pre-assemble them in or a subassembly combining temperature regulation and safety device in single or three-phase.

Please do not hesitate to contact us with your requirements. We will be happy to study them and give you the best advice.

Products available in the field of Renewable energy
 
Type 85
3 poles manual reset high limit, fail saf
 
Type BM
Terminal blocks in ceramic for 3 phase asynchronous electrical motors 450V range Brass or zinc plated steel terminals
 
Type Y22
2 parallel ways connection box for heat tracing cables, with 2 pilot lights and built-in antifreeze thermostat
 
Type 49JB
M20x1.5 Thermostats for mounting in cable glands holes or threads, for boxes external ambient temperature control
 
Type Y514
4 ways in line connection box for heat tracing cables, with insulation piercing terminals, for self-regulating cables
 
Type Y501 and Y502
2 ways in line connection box for heat tracing cables, with insulation piercing terminals, for self-regulating cables
 
Type Y29C and Y29D
Connection box, with pipe mounting leg, for heat tracing cables, for two traditional or self-regulating cables, one power supply cable and temperature sensor cable
 
Type Y28
4 cross ways connection box for heat tracing cables, without thermostat, for traditional or self-regulating cables
 
Type Y27
3 ways “Tee” connection box for heat tracing cables, without thermostat, for traditional or self-regulating cables
 
Type Y260
3 parallel ways connection box for heat tracing cables, without thermostat
 
Type Y25
3 waysin T connection box for heat tracing cables, for traditional or self-regulating cables
 
Type Y24
2 ways in line connection box for heat tracing cables,for traditional or self-regulating cables
 
Type TNJB TPJB TSJB and TJJB
M20x1.5 temperature sensors for mounting in cable glands holes or threads, for boxes external ambient temperature measurement
 
Type BC
Very high temperature steatite connection blocks Indirect pressure clamping, with pressure plate, 750V range
 
Type BK
Very high temperature steatite connection blocks. Indirect pressure clamping with pressure plate, not protected against electric shocks,750V range
 
Type BJ
Steatite connection blocks 450V range Protected against accidental electric contact, stamped terminals, with double entries and double tightening, can be used as a very high temperature junction box
 
Type BA
Steatite connection blocks, 250V range With pressure screws, protected against electric shock
 
Type DT4
Horizontal mounting, reed switch contact, PBT stem, hollow PBT float, 6.35 × 0.8 QC terminals, ½"BSPP thread
 
Type DT3
Horizontal mounting, reed switch contact, PBT stem, hollow PBT float, Cable output, ½”BSPP thread
 
Type DT1
Horizontal mounting, reed switch contact, PBT stem, hollow PBT float, Cable output, ½" NPT thread
 
Type DM6
Vertical mounting, reed switch contact, polypropylene stem with side mounting bracket, dia. 29 × 16.4mm EPS foam float, cable output, for near bottom detection
 
Type DM5
Vertical mounting, reed switch contact, polypropylene stem, dia. 20 × 16.4mm EPS foam float, cable output, side mounting bracket
 
Type 9SFN200 and 9SFN500
Renewable energy immersion heaters Renewable energy 1"1/2 and M45x2 immersion heaters, 12 and 24V power supply with 230V auxiliary heating element, without connection box
 
Type Y6, Y7, Y8 Electronic thermotats
Y6, Y7, Y8 types temperature control boxes Electronic thermostat types
 
Type 9SU831
140 mm d iameter, length 313mm, hai rpi n tubu lar heaters, 1 "1 /2 fitti ngs, With built-in tubular heat exchanger
 
Type 9SU731
Standard liquids heaters 140 mm diameter, length 313mm, hairpin tubular heaters, 1 "1/2 fittings
 
Type 9SU631
Standard liquids heaters 125 mm diameter, length 313mm, hairpin tubular heaters, 1 "1/2 fittings
 
Type 9AL
Non flexible silicone heaters vulcanized on aluminium board, with remote electronic temperature control, on-off action.
 
Type 9AK
Non flexible silicone heaters vulcanized on aluminium board, surface mounted adjustable thermostat.
 
Type 9AC
Silicone rubber heating belts for metal drums, with remote electronic control, on-off action, 0-120°C or 0-200°C
 
Type 9AD
Heating flat ribbons in silicone, width 35 mm, maximum length 10m, for electric tracing.
 
Type 9SU107
Standard liquids heaters 70mm diameter, length 70mm, 1" fittings
 
Type 9SFN202 and 9SFN502
Renewable energy immersion heaters Renewable energy 1"1/2 and M45x2 immersion heaters, 12 and 24V power supply with 230V auxiliary heating element, with connection box
 
Type Y261
3 parallel ways connection box for heat tracing cables, with built-in antifreeze thermostat
 
Type 9STJ
Full stainless steel immersion heaters Full stainless steel immersion heater, without brazing, 105mm × 105mm × 100mm stainless steel enclosure. Stainless steel 1"1/2 fitting. With or without thermostat.
 
Type 9ST4
Immersion heaters with aluminum connection box Immersion heater with 78mm × 78mm × 74mm aluminum enclosure.1"1/4, 1"1/2, M45x2 fittings. With or without thermostat.
 
Type 9ST2
Immersion heaters with plastic connection box Immersion heater with round enclosure, dia. 58 × 75mm. 1"1/4, 1"1/2, M45x2 fittings
 
Type 9RSU3
Immersion heaters Full stainess steel immersion heaters with 3 hairpin heating elements, TIG welded stainless steel fitting (Without brazing), with cylindrical thread 1”1/2 BSPP; M45x2
 
Type 9RBU3
Immersion heaters Immersion heaters with 3 hairpin heating elements, brazed brass fitting, with cylindrical thread 1”1/4 BSPP; 1”1/2 BSPP; M45x2
 
Type 9T10
Cartridge heaters Cartridge heaters dia. 10mm, with built-in thermostat, M14 × 1.5 thread
 
Type 6YTPP
Heat tracing pipe mounting feet for connection boxes, includes gasket for flat self-regulating cables up to 6 x13mm, and for temperature sensor. Self-locking of the gasket tightening. (1" thread)
 
Type 6YTPT and PYTQT
Stainless steel mounting feet for connection boxes, snapped-on or screwed on the bottom of the boxes. Mounting on pipes by nylon ties or metal clamps
 
Type DM1
Reed switch contact, stem with M8 thread, cable output, dia. 25 × 15mm polypropylene float
 
Type R1D
Paddle flow switches, micro-switch contact, ½" BSPP male thread
 
Type Y035 and Y036
Pigtail bulb room thermostats
 
Type Y22D9
Thermostats with IP65 plastic housings, Type Y2 Fixed setting ambiance or antifreeze thermostat, IP65, cable gland output, two pilot lights
 
Type R35
Piston flow switches, reed switch contact, inlet and outlet ½" BSPP
 
Type R20
Flap flow switches, reed switch contact, ½" BSPP male thread
 
Type R1V
Paddle flow switches, reed switch contact, external brass body.
 
Type R1Z2
Paddle flow switches, reed switch contact, low voltage simplified model
 
Type R1X
Paddle flow switches, reed switch contact, external body
 
Type R1S and R1F
Paddle flow switches, reed switch contact, ½" male thread,long paddle
 
Type R15
All stainless steel paddle flow switch, 16A snap action switch, ¾" male thread
 
Type R1R
Paddle flow switches, micro-switch contact, ½" BSPP male thread,
 
Type Y038 and Y039
Bulb and capillary thermostats
 
Type R1B
Paddle flow switches, micro-switch contact, ¾" BSPP union nut.
 
Type LS
Additional thermostat shaft rotary switch, 20A 250-400V
 
Type 82
3 poles manual reset high limit, fail safe
 
Type 8L
SPNC manual reset high limit, fail safe.
 
Type 4C
3 poles manual reset disc thermostat
 
Type 4REMR
Epoxy potted waterproof manual reset disc thermostat, 2 wire output
 
Type 2PE2P6
Electronic thermostat, knob adjustment, remote sensor, Pt100 temperature sensor
 
Type 8C
3 × 16A control thermostat
 
Type 8GB100500
Bulb and capillary thermostat, temperature range 100-500°C
 
Type 4VA and 4VB
Thermostats for incorporation, wire and cable electrical connections Miniature temperature limiters, not current sensing, calibration up to 100°C (212°F), cable or wires connection
 
Type IB
Surface mounting thermostats
 
Type ZT
Air switches for spas and swimming pools Snap action, double poles air switch, center ¼” thread mounting, or surface mounting with
 
Type ZC
Differential pressure switches Low voltage circuit, IP65 waterproof differential pressure switch, various center threads
 
Type ZD
Vacuum pressure switches Low voltage circuit vacuum pressure switch.
 
Type MN3
Adjustable set point positive pressure switches Positive pressure switch Snap action, 3 poles, adjustable, brass fitting
 
Type MB
Adjustable set point positive pressure switches Snap action contact pressure switches, field adjustable, ⅛” fitting, SPDT contact, with or without IP65 enclosure
 
Type MA
Adjustable set point positive pressure switches Snap action contact pressure switches, field adjustable, for incorporation, ⅛” fitting, SPDT contact
 
Type ZQ
Positive pressure switches Pressure switch, single pole snap action contact. Not adjustable set point. SPDT contact. Many dimensions of fittings available
 
Type ZA
Positive pressure switches Low voltage circuit adjustable positive pressure switch. Quick connect terminals. Various center threads.
 
Type Y98KAA
Thermostats and limiters, connection inside EX « e » aluminum housing with built-in connection block Bulb and capillary thermostat, printed knob adjustment
 
Type DM3
Vertical mounting, reed switch contact, polypropylene stem with M8 thread, cable output dia. 20 × 16.4mm EPS foam float
 
Type 4YC
Thermostats for incorporation, wire and cable electrical connections Miniature temperature limiters, not current sensing, calibration up to 90°C (194°F), wires connection to use when R290 highly flammable refrigerant classed A3 upon ISO 817 may be present. This is not a Ex certified product
 
Type Y2T2 and Y2T3
Electronic thermostats, remote sensor, IP69K enclosure in PA66 and PC
 
Type 2DPAP6F
Digital display electronic controller, ON-OFF action, IP69K and IK10 enclosure, wall mounting
 
Type Y2U
Thermostat with external knob adjustment, IP65, with two pilot lights, for industrial jacket and blanket heaters.
 
Type YF5GPP
Adjustable set point rod thermostat, with high corrosion resistance housing, specifically designed for surface treatment baths, and highly basic or acid corrosive liquids or environments.
 
Type Y048 and Y049
Rod thermostats
 
Type Y2D and Y2M
Bulb and capillary thermostats,with 2 built-in pilot lights
 
Type Y09
Combination of adjustable set point thermostat and manual reset high limit, IP54 commercial housing, capillary output, wall mounting
 
Type Y0A8 and Y0A9
Bulb and capillary thermostats, with built-in pilot light and 2 or 3 M20 cable glands
Products are currently being classified and cannot be displayed at the moment